Karcher 8.759-325.0 : Tire Mark Remover and Pre-Soak 55-Gallon Heavy-Duty Low-Foaming Industrial Floor Cleaner for Rubber Marks and Stubborn Stains

Key Product Features

- 55-Gallon Bulk Container: Supplied in a manufacturer-specified 55-gallon drum for high-volume commercial and industrial floor cleaning operations.

- Genuine Karcher Tire Mark Remover: Manufacturer-formulated cleaning solution designed to eliminate stubborn rubber marks and other difficult surface contamination.

- Specialized Rubber Tire Mark Removal: Formulated to remove tire marks from suitable hard flooring surfaces.

- Forklift Tire Mark Cleaning: Helps remove rubber deposits left by forklifts and material-handling equipment on compatible industrial floors.

- Rubber Scuff Removal: Effective against scuff and abrasion marks caused by rubber contact.

- Solvent-Enhanced Cleaning Formula: Uses complementary solvent cleaning action to penetrate and loosen persistent surface marks.

- Heavy-Duty Pre-Soak Performance: Can be applied before scrubbing to loosen stubborn contamination and support easier soil removal.

- Ready-to-Use Concentration: Suitable for direct application when maximum manufacturer-specified cleaning strength is required.

- Dilution up to 1:25: Can be diluted with water for lighter cleaning applications, according to manufacturer instructions.

- Economical Bulk Cleaning Supply: At a concentrate-to-water ratio of 1:25, a 55-gallon drum can prepare approximately 1,430 gallons of diluted solution, including the concentrate.

- Effective Greasy Soil Removal: Helps break down oily dirt and grease on compatible washable surfaces.

- Adhesive Tape Residue Cleaning: Designed to loosen and remove suitable adhesive residue left behind by tape.

- Crayon Mark Removal: Can help remove stubborn crayon markings from appropriate hard surfaces.

- Lipstick Stain Cleaning: Manufacturer documentation identifies lipstick marks among the contaminants the cleaner can remove.

- Smoke Film Removal: Helps loosen smoke-related surface film and accumulated grime.

- Selected Graffiti Cleaning: May remove certain graffiti markings from compatible washable wall surfaces.

- Low-Foaming Formula: Features a manufacturer-rated foam level of 1 out of 5, limiting excessive suds during cleaning.

- Phosphate-Free Formulation: Manufacturer-listed as phosphate-free.

- Excellent Hard-Water Performance: Rated 5 out of 5 by Karcher for effectiveness in hard-water conditions.

- Professional Floor Scrubber Application: Suitable for compatible automatic floor scrubbers used in commercial and industrial maintenance.

- Spray-and-Wipe Application: Can be used for localized cleaning of stubborn marks with appropriate spray equipment and wiping materials.

- Pre-Spray Cleaning: Designed for use as a presoak treatment before mechanical scrubbing.

- Mop and Bucket Cleaning: Supports manual floor cleaning with suitable mops and buckets.

- Scrub Pad Application: Can be used with compatible scrub pads to help remove difficult marks.

- Brush and Squeegee Cleaning: Suitable for manual agitation and solution collection using appropriate brushes and squeegees.

- Wet Vacuum Recovery: Cleaning solution and loosened soil may be recovered using a properly configured wet vacuum cleaner.

- Unfinished Concrete Cleaning: Manufacturer guidance recommends suitable abrasive-style scrubber brushes for unfinished concrete and other appropriate industrial flooring.

- Warehouse Floor Maintenance: Useful for cleaning floors affected by forklifts, loading equipment, and routine warehouse traffic.

- Industrial Workshop Cleaning: Helps remove persistent rubber marks and greasy contamination in compatible workshop environments.

- Distribution Center Applications: Supports regular floor maintenance in warehouses, logistics facilities, and industrial storage areas.

- Professional Janitorial Applications: Suitable for commercial cleaning contractors and industrial facility maintenance departments.

- Strong Alkaline Formula: Features a manufacturer-listed full-strength pH range of approximately 12.0–12.8.

- Clear Yellow Liquid: Karcher's product documentation identifies the cleaner as clear yellow.

- Citrus Scent: Features a manufacturer-listed citrus fragrance.

- Recommended Contact Time: Karcher advises allowing the cleaner to work for several minutes before scrubbing or wiping.

- Heavy-Soil Double Scrubbing: Manufacturer guidance recommends overlapping cleaning passes and double scrubbing when heavy soil is present.

- Helps Maintain Uniform Floor Appearance: Removes prominent rubber marks and stubborn contamination that can make industrial floors look uneven or dirty.

- Kosher Certification: Karcher's documentation identifies Kosher certification for year-round use, excluding Passover.

- Professional Bulk Detergent Supply: The 55-gallon drum supports large industrial facilities and cleaning contractors requiring frequent tire mark removal.

- Alternative 1-Quart Packaging: Karcher separately offers Tire Mark Remover and Pre-Soak under part number 8.759-327.0.

- Alternative 4 × 1-Gallon Case: Karcher also offers the product in a case of four 1-gallon containers, part number 8.759-326.0.

- Accurate Manufacturer Part Identification: Karcher part number 8.759-325.0, also represented as 87593250, supports accurate product identification, inventory management, and bulk detergent ordering.

Why Buy from ProQuip Solutions?

At ProQuip Solutions, we provide genuine Karcher tire mark removers, industrial floor-cleaning chemicals, professional floor scrubber detergents, commercial cleaning equipment, and replacement accessories to support dependable warehouse and facility maintenance operations.

Choose the Karcher 8.759-325.0 Tire Mark Remover and Pre-Soak – 55-Gallon Drum for effective removal of stubborn rubber marks, solvent-enhanced cleaning performance, versatile application methods, and convenient bulk detergent supply for commercial and industrial floor maintenance.