Light Truck / SUV Board

SPC 25435: TOYOTA CAM KIT (2)

This Cam Bolt Kit is a replacement kit for the OE adjusters. The OE bolts on Toyota trucks and SUV's are frequently "frozen" and do not allow for adjustment. Remove the frozen bolt assembly and replace it with an SPC cam kit to get up to ± 1.50° camber...

SPC 82385: CASTER ADJ CAM KIT(PR)

Dodge solid front axled 3/4 and 1-ton trucks equipped with non-adjustable or corroded lower control arm bolts can now replace their OEM bolts with the 82385 Caster Adjustment Cam Kit (pair). These replacement cam bolts provide caster and pinion...

SPC 82400: DODGE CAMBER/CASTER

SPC 82400: Dodge Camber/Caster   Replace OE cams on the lower control arm of popular Dodge Dakota light trucks with this kit. Get the ±2.0° camber/caster change that you need and lock it in with this simple R and R piece.   Front Adjustment Range:...

SPC 86325: ALIGNMENT CAMS GUIDE PINS (8)

Replace bent damaged or lost factory guide pins with these heavy duty knurled pins from SPC and your slotted cam will work like it should again. Every tech needs to have these easy to use pins on the shelf for when a GM 1500, 2500 or Colorado rolls on...

SPC 87385: FORD F150 CAMBER/CASTER KIT (4)

Use this kit to change caster and/or camber on these unadjustable vehicles. Simply replace the existing upper control arm mounting bolts with these cam bolts for caster/camber changes up to 2.0°.   Front Adjustment range: Camber/Caster ±2...

SPC 87400: GM TRUCK CAM KIT (4)

SPC 87400: GM Truck Cam Kit (4)   SKU: SPC87400   These heavy duty cams replace the upper control arm mounting bolts. Remove the O.E. bolts and replace with cams, rotating to provide camber and/or caster adjustment. It may be necessary to remove O.E...

SPC 87420: GM REAR CAMBER KIT

Change Toe or Camber ±1° on the rear of GM's Theta Platform vehicles with this cam nut. Easily make the adjustment you need by installing this cam nut on the toe link's bolt and then driving change in combination with a cam nut on the camber link. (Note:...

SPC 87520: NISSAN/INFINITI CAM KIT (PR)

These cams are designed to install in the lower control arms for camber and caster adjustment. They replace the original non-adjustable lower control arm bolts.   Front Adjustment range: Camber/Caster ±2.00°Installation time: .3 hr/sideRequired: 1 kit...