Bigger and better is here! The new Pure 20 Series Regenerative Dryer is an upgraded version of the Pure 10. The simple, robust and cost effective series has upgraded to supply air systems pulling up to 80 CFM of air. The Pure 20 systems utilize a simple control system and Tsunami pre-filtration to assure removal of water, oil, and particulates before entering the dryer.
Dryer Performance:
Filter Performance:
1st Stage Water Separator:
- 2-stage Pre-filtration; Water Separator, Oil Coalescing Filter
- Molecular Sieve Desiccant
- Solenoid Valve Timer
- Automatic Drains
- Purge Exhaust Mufflers
- Wall Mounting Brackets
- Outlet Regulator
- Heater pads available for cold temp applications
Dryer Performance:
- Low relative humidity - down to .01% RH
- Dew points down to -80°F
- Easy, low-cost maintenance - under $100/year average
Filter Performance:
1st Stage Water Separator:
- Removes liquid water
- Filters particulate down to 10 micron
- Removes bulk oils and aerosols
- Filters particulate down to .01 micron
Min/Max Air Inlet Temperature: 150°F
Min/Max Operating Pressure: 175
Power Requirement: 120V
Compressor Size: 20 Hp
Filter Package #21999-0252
Item # | # of Towers | Orifice | CFM Consumption | Cycle Time | Tower Drying Time | # of Towers Drying | # of Towers Regen. |
21999-1020 | 4 | .030 | 4.4 | 2 minutes | 120 seconds | 2 | 2 |
21999-1020-MM | 4 | .030 | 4.4 | 2 minutes | 120 seconds | 2 | 2 |