Pure 10 Series Regenerative Dryers provide the same high quality air as the Ultra Dryer line at a reduced cost. The Pure 10 systems utilize a simple control system and Tsunami pre-filtration to assure removal of water, oil, and particulates before entering the dryer.
Dryer Performance:
Filter Performance:
1st Stage Water Separator:
- 2-stage Pre-filtration; Water Separator, Oil Coalescing Filter
- Molecular Sieve Desiccant
- Solenoid Valve Timer
- Automatic Drains
- Purge Exhaust Mufflers
- Wall Mounting Brackets
- Outlet Regulator
- Heater pads available for cold temp applications
Dryer Performance:
- Low relative humidity - down to .01% RH
- Dew points down to -80°F
- Easy, low-cost maintenance - under $100/year average
Filter Performance:
1st Stage Water Separator:
- Removes liquid water
- Filters particulate down to 10 micron
- Removes bulk oils and aerosols
- Filters particulate down to .01 micron
Min/Max Air Inlet Temperature: 150°F
Min/Max Operating Pressure: 175
Power Requirement: 120V or 220V
Compressor Size: 10 Hp
Filter Package #21999-0251
Air Consumption Averages and Cycle Time
Item # | # of Towers | Orifice | CFM Consumption | Cycle Time | Tower Drying Time | # of Towers Drying | # of Towers Regen. |
21999-1010 | 2 | .030 | 2.2 | 2 minutes | 120 seconds | 1 | 1 |
21999-1010-220 | 2 | .030 | 2.2 | 2 minutes | 120 seconds | 1 | 1 |
21999-1010-MM | 2 | .030 | 2.2 | 2 minutes | 120 seconds | 1 | 1 |
21999-1010-MM-220 | 2 | .030 | 2.2 | 2 minutes | 120 seconds | 1 | 1 |