A necessary tool for removing the alignment inserts on the upper control arm alignment brackets without damaging the bracket. Includes a center punch and an offset punch.

Center Punch Stud for SPC 74910 Cam Knockout Punch.

A Full Contact Dual Angle shim consisting of only four part numbers that corrects Toe and Camber with one shim.   Instruction sheets are included in each shim package. Various combinations of the...

A Full Contact Dual Angle shim consisting of only four part numbers that corrects Toe and Camber with one shim.   Instruction sheets are included in each shim package. Various combinations of the...

An adjustable steel plate extends the length of the bar to put constant pressure on the brake pedal.

These 1/2" square drive impact sockets are deep and thin walled to reach areas conventional sockets can't. Provides two sizes: 3/4" and 13/16"

Replacement Vial for SPC 81139 Magnetic Adj Camber Gauge

The 81139 is an inexpensive, portable, and very accurate. It has a simple leveling adjustment of ±3°. Housed in a durable, non-magnetic casing with a magnetic head that attaches firmly to rotors or...

Make a two bolt strut adjustable up to ±1.75° camber with the EZCam from Specialty Products. Simply remove the upper bolt, install the EZCam, loosen the lower bolt, and dial in the required change...

Make a two bolt strut adjustable up to ±1.75° camber with the EZCam from Specialty Products. Simply remove the upper bolt, install the EZCam, loosen the lower bolt, and dial in the required change...

Make a two bolt strut adjustable up to ±1.75° camber with the EZCam from Specialty Products. Simply remove the upper bolt, install the EZCam, loosen the lower bolt, and dial in the required change...

Dodge solid front axled 3/4 and 1-ton trucks equipped with non-adjustable or corroded lower control arm bolts can now replace their OEM bolts with the 82385 Caster Adjustment Cam Kit (pair). These...